Custom Frames for harley Big Twins, Sportsters, Triumphs, Xs 650s, and CB 750s

Updated Pricing List!

// NEW! Tig's Digs

// NEW! Local Boyz

// Hardtail Kits and Fabrication

// Custom Gas Tanks

as NOT seen on TV

We can build you any style tank you can think of. Simple to intricate, nothing's off limits.

We can also relocate petcocks, install and relocate gas caps, fix holes in the tank, and make sure the tank is pressure tested.

All of our frames are designed to exacting standards. TIG welded for durability and appearance.

Got a tank idea? We can build or modify a tank to fit your needs.

Send us some pics, ideas, specs - we'll get you the tank you need - and at a fair price.

Email us for a quote.

2012 Pricing

Features a 2" dia. curved and drilled backbone and a 2" dia. single loop oil in frame down tube. Both have a .156 wall thickness. Set up with a 2" dia. straight neck for BT neck cups. 200 mm wide with chain at the axle blocks. Set up for BT pan, shovel or evo and uses tranny plate for your choice of tranny. This package features a no tunnel custom gas tank with a brass gas cap and brass oil filler cap in the down tube. Top motor mount is a bolt in mount installed after the gas tank. Tank has a vertical hole with tube welded in and hangs from mounts that slide into the drilled backbone. Rear axle is included. Priced at $3495. MCO with all frames.

Frames:

One Off frames for:

*)Honda CB750 - 2" HD neck or 2 1/4" stock neck built with 1-1/4" x.120 wall DOM main frame and 1-1/2" x .120 wall DOM back bone 3/8" axle plates 20mm or 3/4" axle slots -- $795 + ship SOHC or DOHC

CB650, CB450, CL350, CL360 all built using 1"main frame tubing priced at $765 + ship.

*)Honda CB750 DOHC one off frames $875 stock style neck or HD style. Built using DOM tubing 1-1/2" backbone and 1-1/4" main frame with 3/8" axle plates

*)Yamaha XS650 - 2" HD neck or 2-1/4" stock neck. Built using 1-1/4" x .12 wall DOM main frame tubing and 1-1/2"x .12 wall back bone. 3/8" axle plates using 20mm or 3/4" axle slots. -- $895 + ship

xs400 - HD or stock style neck. Built using 1" main frame and is priced at $795 + ship

*)xs650 hardtail sections $365 customer install or $465 we install

*)BSA hardtail frames $795

*)Norton Commando Frames $895

*)Triumph 650 & 750 - 2" HD neck or stock. Built with 1-1/4"x .120 wall DOM main frame tubing. 1-1/2"x .12 wall backbone and 3/8" plates. 5/8" or 3/4" axle slots. ---- $795 + ship

900cc new TR -- built with 1-1/4"main frame and 1 -1/2" backbone, 3/8" axle plates. axle slots 3/4" or 1.0" --- $1400

*)Harley Davidson -- sportster/buell - 1957 thru 2003. hard mounted $1150

*)Harley Davidson --- sportster rubber mount 2004 and up $1500

*)Big Twin - $1300 1 1/4" main frame with 1 1/2" backbone dual downtube. add $50 for 200mm wide, add $100 for up to 280 mm wide.

Single Loop Big Twin $1550 Board tracker style 1 1/4" main frame and 1 1/2" backbone and downtube for 2" backbone and downtube $1850 add $250 for drilled downtube or drilled backbone.

Drilled d.tube or backbone comes with 1" drilled holes with welded tubing inserts and have a 3/4" finish hole size.

*)Big Twin softtail--- mono shock $1800 (shock not included) $2300 includes progressive shock.

*)CB750 STAGE 3 HARDTAIL KIT - SOHC- $395 customer install $495 we install. ADD $50 for 200mm wide. (will need offset engine sprocket not included for 200mm hardtails).

comes with a 4" rear stretch. rear section and is fully tig welded together using 1 1/4" DOM x .12 wall tubing. replaces and extends the backbone to 1 1/2" x.12 DOM.

included are 3 sleeves for extra strength weld seams, top rear motor mount plates, seatpost assembly with T mounts, new lower rear motor mounts, brake tab, brake stay bracket and battery tray.

*)CB750 STAGE 3 HARDTAIL KIT - DOHC - $465 customer install $565 we install. we utilize the removable right side tube for engine installation. Add $100 if you need the extra tube.